Hobby & Model Warehouse

●Small and compact PCB design for ease of installation.
●Large heatsink for great thermal performance.
●High compatibility to work with 98% brushless
motors in the market.
●Ultra smooth motor start design to run with all
kinds of brushless motors.
●The power inlet adapts Japanese made "Low ESR"
capacitor in order to provide stable power
source.
●T BEC power outlet adapts a Japanese made
specialty polymer aluminum electrolytic
capacitor.
It porvides better noise filtering capability
than other BL ESC in the market,
and moreover to give more stable performance of
R/C receiver and BEC.
●The BEC adapts dual TO-252 package regulators.
It provides great thermal performance with 1A
peak current.
●The throttle has more than 200 steps resolution
that provides great controlling sense.
Specification:
●Contimuous current:10Amps with porper air flow
●Surge current:14Amps for 15seconds
●Supporting motor types:2 poles to 10+poles in/outrunner brushless motors
●Supporting maximum RPM:2poles=>190,000rpm
●Supporting input voltage:5.5V~16.8V
●Supporting battery types: Li-ion/ Li-poly 2~4 cells, Ni-Mh 6-12 cells
●BEC output: Max current 1A
2 cells Lithium/6~7 cells=>3servos
3 cells Lithium/8~9 cells=>2servos
●Size:45X22X5mm
●Weight:11g

●***Govener Mode(governor speed controller、solf start system)***(New)
●Small and compact PCB design for ease of installation.
●Large heatsink for great thermal performance.
●High compatibility to work with 98% brushless motors in the market.
●Ultra smooth motor start design to run with all kinds of brushless motors.
●The power inlet adapts Japanese made "Low ESR" capacitor in order to provide stable power source.
●T BEC power outlet adapts a Japanese made specialty polymer aluminum electrolytic capacitor. It porvides better noise filtering capability than other BL ESC in the market, and moreover to give more stable performance of R/C receiver and BEC.
●The BEC adapts dual TO-252 package regulators. It provides great thermal performance with 2A peak current.
●The throttle has more than 200 steps resolution that provides great controlling sense.

Specification:

●Contimuous current:25Amps with porper air flow
●Surge current:35Amps for 15seconds
●Supporting motor types:2 poles to 10+poles in/outrunner brushless motors
●Supporting maximum RPM:2poles=>190,000rpm
●Supporting input voltage:5.5V~16.8V
●Supporting battery types: Li-ion/ Li-poly 2~4 cells, Ni-Mh 6-12 cells
●BEC output: Max current 2A
2 cells Lithium/6~7 Ni-Mh cells=>4servos
3 cells Lithium/8~9 Ni-Mh cells=>3servos
4 cells Lithium/10~12 Ni-Mh cells=>2servos
●Size:45X24X11m/m
●Weight:23g

●**Govener Mode(governor speed controller、solf start system)**(New)
●Small and compact PCB design for ease of installation.
●Large heatsink for great thermal performance.
●High compatibility to work with 98% brushless motors in the market.
●Ultra smooth motor start design to run with all kinds of brushless motors.
●The power inlet adapts Japanese made "Low ESR" capacitor in order to provide stable power source.
●T BEC power outlet adapts a Japanese made specialty polymer aluminum electrolytic capacitor. It porvides better noise filtering capability than other BL ESC in the market, and moreover to give more stable performance of R/C receiver and BEC.
●The BEC adapts dual TO-252 package regulators. It provides great thermal performance with 2A peak current.
●The throttle has more than 200 steps resolution that provides great controlling sense.
Specification:

●Contimuous current:35Amps with porper air flow
●Surge current:50Amps for 15seconds
●Supporting motor types:2 poles to 10+poles in/outrunner brushless motors
●Supporting maximum RPM:2poles=>190,000rpm
●Supporting input voltage:5.5V~16.8V
●Supporting battery types: Li-ion/ Li-poly 2~4 cells, Ni-Mh 6-12 cells
●BEC output: Max current 2A
2 cells Lithium/6~7 Ni-Mh cells=>4servos
3 cells Lithium/8~9 Ni-Mh cells=>3servos
4 cells Lithium/10~12 Ni-Mh cells=>2servos
●Size:45X23X12m/m
●Weight:25g

Specification:
●Contimuous current:75Amps with porper air flow
●Surge current:100Amps for 15seconds
●Supporting motor types:2 poles to 10+poles in/outrunner brushless motors
●Supporting maximum RPM:2poles=>190,000rpm
●Supporting input voltage:5.5V~25.2V
●Supporting battery types: Li-ion/ Li-poly 2~6 cells, Ni-Mh 6-18 cells
●Size:72X28X11mm
●Weight:53.7g
NOTE: Not including BEC. User need to provide the power for receiver and servo.

Accessories:
plus
●ALIGN standard 4mm gilt terminal X3set(Max. current 80A)
●ALIGN standard 3mm gilt terminal X1set(Max. current 50A)

A: Input Voltage Range:5.6V-16.8V,2-4 Cell Li-poly or 5-12 Cell NiCad/NiMH Packs.
B: BEC (Output current): 2A
2Cell Li-poly/5-7 Cell NiMh, 5 servo max,
3Cell Li-poly/8-10 Cell NiMh, 4 servo max,
4Cell Li-poly/11-12 Cell NiMh, 2servo max.
C: Size: 24 x 45 x 12mm
E: weight: 24g
D: Current: 18A continue; 22A burst (10s)
***For Plane & Heli only

2 Features

2.1 Safety Arming Feature: Regardless the Throttle Stick position, the motor will not spin after battery connected. This will prevent any injury happened.

2.2 Throttle Calibration: Throttle range can be configured to provide best throttling linearity, fully compatible with all market available transmitters.

2.3 Programmable Items:

●Brake Settings：brake enabled / brake disabled, default is brake disabled

●Battery Type：Li-xx(Li-ion or Li-poly) / Ni-xx(NiMh or Nicd)，default is Li-xx.

●Low Voltage Protection Mode(Cutoff Mode) ：power reducing / power cutoff, default is power reducing.

●Low Voltage Protection Threshold(Cutoff Threshold) ：low / medium / high, default is medium cutoff voltage.

1) For Li-xx battery，number of battery cells are judged automatically，low / medium / high cutoff voltage for each cell are: 2.6V/2.85V/3.1V. For example: 3 Cells Li-Poly, when medium cutoff voltage is set, the cutoff voltage is: 2.85*3=8.55V.

2) For Ni-xx battery, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage (0% means the low voltage cutoff protection function is disabled) . For example: a 10 cells NiMH battery pack, fully charged voltage is 1.44*10=14.4V, when medium cutoff voltage is set, the cutoff voltage is : 14.4*45%=6.5V.

●Startup mode: normal / soft / super-soft, default is normal startup.

●Timing: low / medium / high, default is medium timing. In normal cases, low timing can be used for most motors. But for high efficiency, we recommend the Low timing for 2 poles motor and Medium timing for 6 poles and above. For higher speed, High timing could be used.

2.4 Full Protection Features: Low-voltage cutoff protection / over-heat protection / throttle signal lost protection.

3 Advantages

3.1 Military Standard Capacitor with extremely low resistance used on voltage input section, this will increase the ability of prevention of unwanted RF Noise/ Interference during flying.

3.2 Extreme low resistance, super current endurance.

3.3 Microprocessor and BEC use separate voltage regulator IC, with good anti-jamming capability.

2 Features

2.1 Safety Arming Feature: Regardless the Throttle Stick position, the motor will not spin after battery connected. This will prevent any injury happened.

2.2 Throttle Calibration: Throttle range can be configured to provide best throttling linearity, fully compatible with all market available transmitters.

2.3 Programmable Items:

●Brake Settings：brake enabled / brake disabled, default is brake disabled

●Battery Type：Li-xx(Li-ion or Li-poly) / Ni-xx(NiMh or Nicd)，default is Li-xx.

●Low Voltage Protection Mode(Cutoff Mode) ：power reducing / power cutoff, default is power reducing.

●Low Voltage Protection Threshold(Cutoff Threshold) ：low / medium / high, default is medium cutoff voltage.

1) For Li-xx battery，number of battery cells are judged automatically，low / medium / high cutoff voltage for each cell are: 2.6V/2.85V/3.1V. For example: 3 Cells Li-Poly, when medium cutoff voltage is set, the cutoff voltage is: 2.85*3=8.55V.

2) For Ni-xx battery, low / medium / high cutoff voltages are 0%(ie. never cut off )/45%/60% of the startup voltage. For example: a 10 cells NiMH battery pack, fully charged voltage is 1.44*10=14.4V, when medium cutoff voltage is set, the cutoff voltage is : 14.4*45%=6.5V.

●Startup mode: normal / soft / super-soft, default is normal startup.

●Timing: low / medium / high, default is medium timing. In normal cases, low timing can be used for most motors. But for high efficiency, we recommend the Low timing for 2 poles motor and Medium timing for 6 poles and above. For higher speed, High timing could be used.

2.4 Full Protection Features: Low-voltage cutoff protection / over-heat protection / throttle signal lost protection.

3 Advantages

3.1 Military Standard Capacitor with extremely low resistance used on voltage input section, this will increase the ability of prevention of unwanted RF Noise/ Interference during flying.

3.2 Seperate PCB for control circuit and MOSFET circuit: adiabatic air gap between control circuit PCB and MOSFET circuit PCB reduces the heat exchange form MOSFET to control circuit, so the ESC works more reliable.

3.3 Extreme low resistance, super current endurance.

3.4 Microprocessor and BEC use separate voltage regulator IC, with good anti-jamming capability.

2 Features

2.1 Safety Arming Feature: Regardless the Throttle Stick position, the motor will not spin after battery connected. This will prevent any injury happened.

2.2 Throttle Calibration: Throttle range can be configured to provide best throttling linearity, fully compatible with all market available transmitters.

2.3 Programmable Items:

●Brake Settings：brake enabled / brake disabled, default is brake disabled

●Battery Type：Li-xx(Li-ion or Li-poly) / Ni-xx(NiMh or Nicd)，default is Li-xx.

●Low Voltage Protection Mode(Cutoff Mode) ：power reducing / power cutoff, default is power reducing.

●Low Voltage Protection Threshold(Cutoff Threshold) ：low / medium / high, default is medium cutoff voltage.

1) For Li-xx battery，number of battery cells are judged automatically，low / medium / high cutoff voltage for each cell are: 2.5V/2.75V/3.0V. For example: 10 Cell Li-Poly, when medium cutoff voltage is set, the cutoff voltage is: 2.75*10=27.5V.

2) For Ni-xx battery, low / medium / high cutoff voltages are 0%(ie. never cut off )/45%/60% of the startup voltage. For example: a 10 cells NiMH battery pack, fully charged voltage is 1.44*10=14.4V, when medium cutoff voltage is set, the cutoff voltage is : 14.4*45%=6.5V。

●Startup mode: normal / soft / super-soft, default is normal startup.

●Timing: low / medium / high, default is medium timing. In normal cases, low timing can be used for most motors. But for high efficiency, we recommend the Low timing for 2 poles motor and Medium timing for 6 poles and above. For higher speed, High timing could be used.

2.4 Full Protection Features: Low-voltage cutoff protection / over-heat protection / throttle signal lost protection.

3 Advantages

3.1 Military Standard Capacitor with extreme low resistance used on voltage input section, this will increase the ability of prevention of unwanted RF Noise/ Interference during flying.

3.2 .Extreme low resistance PCB used on power output section, the thickness of copper sheet is more than 0.7mm.So the whole ESC has super current endurance capability