【ARF Combo】
●T-REX 450S CF(eCCPM) helicopter is great for 3D flight and wind resistance, the main frames are made by high strength light aluminum alloy and carbon fiber materail, suitable for 3D Acrobatics and beginners.
●Package- Helicopter completely assembled. The users only need to simply install the power/electronic equipment and make some adjustments. Then enjoy the flight.
●1mm CNC aluminum alloy main frames features the rigidity and great for 3D flight.
●Aluminum alloy battery mounting plate is fixed to aluminum alloy mounting plate mount for connecting to main frames. Set the battery here and make the center of gravity close to the rotor blade sides for reducing the trim when the heli rolling.
●CNC Main rotor housing is made by hard aluminum alloy material.
●Using Ball and Hiller two systems mixing control. Through simple structure of Ball control system, power-saving of Hiller system and CCPM control, can simultaneously control 3 servo for AILE, EVLE, PIT 3 actions. This CCPM control system is great for 3D flying control and extending life cycle of servos.
●New streamlined carbon tail rotor blades makes the gyro more efficient.
●New design for Tail pitch assembly, upgrade to ball control slider bushing with dual bearing, add collars to ball links for reducing the gaps, maks the change of pitch travel more smooth.
●Using new design on tail rudder control rod and control guide for smooth control, the design is same as TREX 600.
●Providing flybar weight- When normal flying, you can add the weights on flybar paddles for stable flight. When aerobatic flying, you don’t need to add the weight, but you can see the flexibility of 3D actions.
●New gear ratio(4.24:1), suitable for the motor with higher KV, provide more safty.
●Using super strength drive belt and tail drive gear, features wear resistant to reduce power loss.
●All kit use stainless steel linkage ball, wear resistance, anti-oxidization.
●Tail rotor hub made of stainless steel, very rigid.
●Use 33pcs precision bearing.
●Great stable and sensitive mixing lever design! Can disply the great stability and precision for 3D flight.
●Special adjustable pitch system, hold rotation system, tail rotor drive belt system! It is a work of great originality for helicopter!

Instructions:
【KIT Combo】
●T-REX 450S CF(eCCPM) helicopter is great for 3D flight and wind resistance, the main frames are made by high strength light aluminum alloy and carbon fiber materail, suitable for 3D Acrobatics and beginners.
●This kit is for the flyers who want uncompromised performance and quality. This SE arrived with 80% pre-assembled!
●1mm CNC aluminum alloy main frames features the rigidity and great for 3D flight.
●Aluminum alloy battery mounting plate is fixed to aluminum alloy mounting plate mount for connecting to main frames. Set the battery here and make the center of gravity close to the rotor blade sides for reducing the trim when the heli rolling.
●CNC Main rotor housing is made by hard aluminum alloy material.
●Using Ball and Hiller two systems mixing control. Through simple structure of Ball control system, power-saving of Hiller system and CCPM control, can simultaneously control 3 servo for AILE, EVLE, PIT 3 actions. This CCPM control system is great for 3D flying control and extending life cycle of servos.
●New streamlined carbon tail rotor blades makes the gyro more efficient.
●New design for Tail pitch assembly, upgrade to ball control slider bushing with dual bearing, add collars to ball links for reducing the gaps, maks the change of pitch travel more smooth.
●Using new design on tail rudder control rod and control guide for smooth control, the design is same as TREX 600.
●Providing flybar weight- When normal flying, you can add the weights on flybar paddles for stable flight. When aerobatic flying, you don’t need to add the weight, but you can see the flexibility of 3D actions.
●New gear ratio(4.24:1), suitable for the motor with higher KV, provide more safty.
●Using super strength drive belt and tail drive gear, features wear resistant to reduce power loss.
●All kit use stainless steel linkage ball, wear resistance, anti-oxidization.
●Tail rotor hub made of stainless steel, very rigid.
●Use 33pcs precision bearing.
●Great stable and sensitive mixing lever design! Can disply the great stability and precision for 3D flight.
●Special adjustable pitch system, hold rotation system, tail rotor drive belt system! It is a work of great originality for helicopter!

●T-REX 450S CF(eCCPM) helicopter is great for 3D flight and wind resistance, the main frames are made by high strength carbon fiber and light aluminum alloy material, suitable for 3D Acrobatics and beginners.
●This kit is for the flyers who want uncompromised performance and quality. This SE arrived with 80% pre-assembled!
●1mm CNC carbon fiber main frames features the rigidity and great for 3D flight.
●3K carbon fiber battery mounting plate is fixed to aluminum alloy mounting plate mount for connecting to main frames. Set the battery here and make the center of gravity close to the rotor blade sides for reducing the trim when the heli rolling.
●CNC Main rotor housing is made by hard aluminum alloy material.
●Using Ball and Hiller two systems mixing control. Through simple structure of Ball control system, power-saving of Hiller system and CCPM control, can simultaneously control 3 servo for AILE, EVLE, PIT 3 actions. This CCPM control system is great for 3D flying control and extending life cycle of servos.
●New streamlined carbon tail rotor blades makes the gyro more efficient.
●New design for Tail pitch assembly, upgrade to ball control slider bushing with dual bearing, add collars to ball links for reducing the gaps, maks the change of pitch travel more smooth.
●Using new design on tail rudder control rod and control guide for smooth control, the design is same as TREX 600.
●Providing flybar weight- When normal flying, you can add the weights on flybar paddles for stable flight. When aerobatic flying, you don’t need to add the weight, but you can see the flexibility of 3D actions.
●New gear ratio(4.24:1), suitable for the motor with higher KV, provide more safty.
●Using super strength drive belt and tail drive gear, features wear resistant to reduce power loss.
●All kit use stainless steel linkage ball, wear resistance, anti-oxidization.
●Tail rotor hub made of stainless steel, very rigid.
●Use 33pcs precision bearing.
●Great stable and sensitive mixing lever design! Can disply the great stability and precision for 3D flight.
●Special adjustable pitch system, hold rotation system, tail rotor drive belt system! It is a work of great originality for helicopter!

 

● This kit is for the flyers who want uncompromised performance and quality. This SE arrived with 80% pre-assembled.
● New CNC SSG carbon frame only 1mm, improve the rigidity and perfect for 3D flying.
● CCPM version, new aluminum parts for prompt, precision actions.
● New longer SSG battery mounting plate connects to main frame. It makes the center of gravity closed to rotor blade, and can adjust the center of gravity according to the weight of battery, it reduces the correction when the heli rolling.
● Rigid CNC aluminum rotor head for precision and smooth movements.
● Using new Main rotor holder with thrust bearing and 4mm Feathering shaft, features smooth rotation and stability under high rotation speed.
● Using Ball and Hiller two systems mixing control. Through simple structure of Ball control system, power-saving of Hiller system and CCPM control, can simultaneously control 3 servo for AILE, EVLE, PIT 3 actions. This CCPM control system is great for 3D flying control and extending life cycle of servos.
● New c.g. amended tail blades feature streamlined and quick, make the gyro more efficient.
● New tail rotor control set with dual bearing, features CNC control piece and smooth structure design, get smooth pitch travel.
● Providing flybar weight- When normal flying, you can add the weights on flybar paddles for stable flight. When aerobatic flying, you don’t need to add the weight, but you can see the flexibility of 3D actions.
● CNC tail pulley assembly and tail holder are using high rigid aluminum alloy, features wear resistant and falling resistance.

● New gear ratio(4.24:1), suitable for the motor with higher KV, provide more safty.
● Use Aluminum alloy drive pulley and tail drive pulley, high regid and wear resistance. It is efficient to reduce the rotation loss and makes more smooth.
● Using new high strength ball links and stainless steel linkage balls on the whole unit, feature wear resistance, anti-oxidization.
● Tail rotor hub made of stainless steel, very rigid.
● Use 35pcs precision bearing.
● Great stable and sensitive mixing lever design! Can disply the great stability and precision for 3D flight.
● T-REX 450SE special adjustable pitch system, hold rotation system, tail rotor drive belt system! It is a work of great originality for helicopter!